供应JPF-200T重型气动冲床

机型特点Model features
一．结构Structure
1.高强度、高精密的机架，采用钢板焊接及消失模HT250铸铁2种，并经退火处理，消除床身内应力，增加机身韧性及强度。
High strength, high precision of the rack, is welded by steel plate and EPC cast iron2HT250, and after annealing treatment to eliminate internal stress, bed, increase the toughness and strength.
 
2.结构件负荷均匀，刚性平衡。
Pieces of the structure of uniform load, rigidity balance.
 
3.传动中心与机器整体的中心趋于一致，确保冲压的**、稳定。
Transmission center and the whole machine centers tend to be consistent, ensure the stamping precision, stable.
 
二．安全Safety
1. 金合力所**器都配备了先进的干式刹车离合器，再加上**敏锐的双联电磁阀能在较大限度内缩短刹车时间。另外，刹车辅助系统二度落装置在突发事件中，当检测到刹车刹不住时，会再次提供刹车信号，以再次提供刹车信号，以提供足够动力**及时准确刹车。
Jinheli all machines are equipped with advanced dry braking clutch, coupled with precise sharp double solenoid valve can in maximum shortening braking time. In addition, brake assist system two degree drop device in the event of an emergency, when detecting the brake does not live, will again provide the brake **, to once again provide the brake **, in order to provide sufficient power to ensure timely and accurate brake.
 
2. 较高程度的保护使用者是我们的较大目标。因此，双手操作按钮之间以及与机身之间都留出足够空间，以保护人手的安全，同时，在系统设计中规定了双手同时操作才能起动，以确保以免误操作造成的人身伤害。光电保护装置或者防护网的加装都进一步提高了对使用者的保护。
The highest degree of protection of users is our greatest goal. Therefore, the hands operation button and between the fuselage and leave enough space between, in order to protect the people 's safety, at the same time, in the system design are provided in both hands simultaneous operation to start, in order to ensure to avoid misoperation caused personal injury. Photoelectric protection device or a protective net which can further improve the protection to users.
 
3. 金合力冲床都标准配置了进口的过负载装置以保护冲床由于过载冲压，造成模具的变形损坏，同时，还可以加装误送检测装置可配合自动冲压模具装置，以更好的保护模具。
Jinheli presses are standard configuration of the imported over load device to protect the punch due to overload caused by stamping, mold damage, at the same time, can also be added to fault detection device can be matched with automatic punching die device, in order to better protect the mold.
 
三．精度高High precision
1.精密度高达0.05mm，生产更具安全、稳定和效率。
High precision of 0.05mm, the production of more safety, stability and efficiency.
 
2.所有的零部件（含机身、曲轴、滑块等）都经过各类不同的工艺处理，如去应力等，以**产品精度的稳定。
All of the parts (including the fuselage, crank, slider ) through various processes, such as stress, to ensure product accuracy and stability.
 
3. 所有材料都是同类产品中较高级别的材料，以确保机器的稳定性和精密度。
All materials are similar products in the highest levels of material, to ensure the stability of machine and precision.
 
四、加工自动化Process automation
可搭配任何的自动送料机构，设定好各参数，配置好相关感应后，一人可以管理5-8台机器，进行自动化生产、降低成本，提**。
Can match any of the automatic feeding mechanism, setting the parameters, configuration related to induction, one person can manage5-8 machines, automatic production, reduce costs, improve efficiency.
 
五、环保Environmental protection
外形美观，低噪音、低消耗、节省能源，流畅简洁的外观更能体现出先进的设计理念。
Beautiful appearance, low noise, low consumption, energy saving, smooth and neat appearance to reflect more advanced design concepts.
 
 
 
配置To configure
配置
To configure
标准Standard
油压式**载保护装置
Hydraulic overload protection device
O
手动式滑块调整装置(JPA—60及60以下)
Manual slide adjusting device ( JPA - 60and60 below )
O
电动式滑块调整装置JPA—60以上)
Slide adjust device ( JPA- 60)
O
机械式模高指示器(JPA—60及60以下)
Mechanical die height indicator ( JPA - 60and60 below )
O
电动式模高指示器(JPA—60以上)
Electrodynamic type die height indicator ( JPA - 60)
O
滑块及模具平衡装置
Slide and the die balance device
O
电子式旋转凸轮开关
Rotary cam switch
O
电子式曲轴角度速度显示器
Electronic type crankshaft angle speed display
O
电源插座
Power socket
O
计数器
Counter
O
预裁计数器
Pre cutting counter
O
预断计数器
Preset counter
O
空气源接头
Air source adapter
O
二度落保护装置
Two degrees fall protection device
O
维护工具及工具箱
Maintenance tool box
O
使用说明书
An instruction manual
O
 
配置
To configure
选配Matching
电动式黄油润滑装置
Electric grease lubricating device
O
气压模垫装置
Pneumatic die cushion device
O
变频器
Frequency converter
O
脚踏开关
Pedal switch
O
**换模装置(举模器、夹模器或移模臂)
Quick die change device (die lifter, clamp and die arm )
O
滑块**料装置
Slide lifting device
O
误送检测装置
Fault detecting device
O
防震脚垫
Earthquake Ottomans
O
光电保护装置
Photoelectric protection device
O
送料机(空气、机械及NC各类)
Feeding machine ( air, NC machinery and all kinds of )
O
料架
Rack
O
矫平机
Leveling machine
O
机械手
Manipulator
O
模具照明装置
Die lighting device
O
 
Technical Parameter技术参数：
机种
 
 
JPF-200
 
 
 
H
S
吨数
Capacity
ton
200
能力发生点
Rating Tonnage Point(above B.D.C)
mm
3
7
行程长
Stroke Length
mm
40
250
行程数
Stroke Per Minute
spm
60~130
20~45
较大模高
Die Height(S.D.A.U)
mm
350
450
滑块调整量
Slide Adjustment
mm
100
110
台板面积
Bolster Area(LR×FB)
mm
900×900
1000×900
滑块面积
Slide Area(LR×FB×T)
mm
800×800
900×800